Tag Archives: usage

How to install inflatable movie screen?

Instructions
1.Clear an enough area of rocks, twigs or branches or sharp objects. Take the screen out of package bag and place the front facing downward on the ground, lawn or unfold it on top of a sheet. Make sure there are no twists in the outside frame before plugging it in to activate blowers.

2. Attach the screen itself to the back of the inflatable frame. Typically, it will clip on all the way around the screen. The wrinkles from folding and storing will not be noticeable once it gets dark and the projector is shining light on it. When you are ready to go, plug it in and watch the whole thing inflate in seconds.

3. Use any tie-down cords and stakes to secure the screen. They clip to loops on the sides, top and bottom. Tie them around trees or fences or hammer a stake into the ground so the wind doesn’t topple the screen. Have a friend hold the screen while you attach and secure the tie-down cords.
1

Tips & Warnings
Set up a table and projector about 12 to 15 feet in front of screen. Place the projector and computer on the table and plug everything into a power strip. Connect the two devices with appropriate cords that come with projector.
2

Speakers can be set up to the right and left of the screen, and you can set up lawn chairs for your audience.

The sound of the blower will be continual, but with the audio cranked up, you should hardly notice it.

It takes about 30 minutes or so to get everything in place.

Picking the right movie may be difficult. Popular titles like “Finding Nemo” or “Cars” are favorites with all ages.

It does take about 30 minutes or so to get everything set up, but breakdown is much quicker for some reason.

Have one place for all cords, wires, plugs, etc. and you can set up quickly the for the next movie night.
3

Written by Doris from East Inflatables.

Water Slide SAFETY RULES

In East Inflatables, safety is our priority. Our rules help everyone to stay safe while having fun. It is very important that ride attendants watch out for the safety of participants and observe the following rules:

1.Always have at least one trained adult to supervise riders at all times.
2.Do not use slide as bouncer.
3.Instruct all passengers to ride individually. Single riders only!
4.Never jump, flip or somersault off top of slide.
5.Supervisor should not allow participants to slide down until slide landing area is clear of riders.
6.Rider should sit down at the top of the slide with their feet out in front and then push off going feet first only.
7.Keep landing areas clear at all times.
8.Do not throw or drop any object from or towards a ride.
9.Do not operate inflatable rides in heavy wind (above 20 mph) or rain.
1

Written by Eva from East Inflatables.

Usage of Zorb Balls

How to use Zorb Balls?

1. Be sure to take off hard stuffs before enter Zorb Ball, such as : Shoes, keys and so on.
2. For entering Zorb, hold Zorb entrance down, body bow and enter into Zorb entrance, two hands together put on inside core, then jump into Zorb inside.
3. For getting out of Zorb, hold Zorb entrance adown, players two leg extend out of Zorb from entrance first, then two hands hold on inside core and jump out from Zorb.
1
4. Make sure all safety belts are in good condition and tightly wrap on body correctly before playing.
5. Do not load extra force on Zorb Ball when it is in rolling.

Zorb ball maintenance tips

1. Always check zorb balls condition before usage
2. Always clean the zorb ball after each day of usage.
3. Check Zorb Ball’s air pressure regularly
2

How to repair Zorb Balls?

1. Be sure the hole area is clean and dry
2. Cut off one TPU patch piece from patch and be sure this piece of TPU is clean and dry
3. Smear Resin Adhesive onto both zorb hole are and TPU patch piece
4. Wait a moment, until Resin Adhesive is dry on both hole area and TPU patch piece (use finger to touch Resin adhesive, if finger does not paste by Resin adhesive,then it’s ok, go to next step)
5. Paste patch piece onto zorb hole area
6. Press on adhesive area, make patch piece can be pasted on zorb smoothly and tightly sealed
7. Wait for 20 minutes, or use hair dryer blow on repaired area, made temperature raise to 40-50°C and wait 10-15 minutes,then you can inflate zorb again
8. Double smear resin adhesive onto zorb ball and patch piece if necessary to reinforce adhesive function

Caution

1. Do not get out from Zorb ball immediately once ball stop rolling, please stay in zorb ball 1-2 minutes before getting out
2. As Zorb ball is with high speed when in rolling, it is not suitable for age under 10 nor age over 55

Written by Doris from East Inflatables.

How to deflate and pack a bouncer ?

Before Deflating
1.Before breaking down any game, inspect the game for any damages and repair as necessary. Remove all accessories that may be applicable to the game. This may include items such as harnesses, backing plates, bungee cords, etc… Be sure to use a quality broom and sweep the surface of the game free of any debris. Check to make sure that no sharp objects have fallen into the seams of the game, i.e. pens, rocks, etc. also make sure the game is dry, if not, please dry the game.
2.Buckle any plastic snaps to reduce the possibility of entanglement in the mesh. If the unit steps attached to it, we highly recommend removing the steps and rolling them separately. This is to ensure the life span and quality of the steps.
Deflating
3.Turn off and unplug the blower fan. As the game begins to deflate, go around and unlock the strap that secures the blower tube to the blower. Unhook the strap on the other blower tube to allow air to escape. If the unit has zippers. Unzip the zipper to speed up the deflation process.
1
4.Pull out the stakes around the unit and pack them up.
5.Walk from front to back of the unit to move any remaining air towards the blower tubes.
Folding
6.Fold in the base of the unit all the way around and walk around the unit to remove any air.
2
7.Now make two half folds to the middle and walk around to remove any air.
3
8.Fold in the half folds and again walk around removing any remaining air. You are ready to roll!
4
Rolling
9.Prior to rolling the game, make sure that there is no excessive air and the fold is firm. Start your roll from the front of the unit and roll it up like a sleeping bag. Keep pushing and flattening the roll as you go. You may also want to have someone walk on the roll in front of you.
5
10.At the end of the roll, the blower tubes must be on the outside. Slide the straps under the unit and then run the end of the straps through the rings on the other end of the straps, pull tight. Loop the end of the strap around and tie a tight slipknot.
6
Storing the Game
11.Place the storage bag over the end of the game and work it down as far as you can. It is important
12.At you work the bottom of the bag down to the top of the roll. Rotate the game 180 degrees and pull the bag over the top of the game/ Tie the bag closed.Use a two wheel dolly to transport the unit, blower and accessories. Now you are ready to pack up and leave.
7

Written by Doris from East Inflatables.

Water Ball

Water Ball Usage Rules:

1. Never use without adult supervision
2. Always test and check product and equipment before use
3. Always lubricate zipper before use
4. Always check safety equipment before use
5. User must be at least 5 years old, and be able to swim
6. User must not weigh more than 90 KG
7. User must not be under the influence of alcohol, drugs or other stimulus
8. User must not have undergone surgery within the last 6 months
9. Never use in stormy water, or if there are strong currents

Usage of water-walking ball:

3

The water ball is inflated with a special pump, when fully inflated the ball contains enough air for 45 minutes of continuous use, but we recommend to always refill the ball with fresh air after 10 minutes of use.

The water ball can be used at very low water level, and 40-50 cm of water is sufficient for the user to have tons of fun.

When using the water ball the user should empty their pockets of sharp objects, and remove their shoes before climbing into the water ball.

There can only be one person inside the water ball at a time, this is to make sure that the users does not collide and hurt each other

The maximum weight allowed in the water ball is 90 KG People suffering of high blood pressure, heart problems, epilepsy or claustrophobia are not recommended to use the water ball nor if you are visibly drunk or affected by drugs.

The water ball can be used anywhere there is water including, beaches, pools, lakes, rivers.

2

More Storage Rules

  • Always dry the ball before storage.
  • Always clean the ball before storage.
  • Never fold the zipper when stored.
  • Always lubricate the zipper before storage.
  • Always dry the safety ropes and equipment before storage.

Written by Doris from from East inflatables !