Does East Inflatables comply with Australian standard AS 3533.4.1 – 2005?

Every customer from Australia always have query that does your inflatables meet Australian Standard AS 3533.4.1 – 2005?
Then what is AS 3533.4.1 – 2005? What should buyer pay attention to?
Today, I will list some points on this standard as following:
East Inflatables use only the finest quality, heavy duty, reinforced vinyl and extra strength thread. Quality materials result in longer life and higher profitability.

1. Material and Accessories
The data below compares our inflatable specifications to the requirements set down in the Australian Standard AS 3533.4.1 – 2005

Australian Standards East Inflatables Specifications
Rope Breaking strain of 8 kN 12 mm silver rope rated to 9.5 kN
Thread 88 N tensile strength 175 N tensile strength
PVC
Tear Strength

Tensile Strength

400 N warp350 N weft

2250 N warp 1850 N weft

450 N warp387N weft

2598 N warp 2356 N weft

Anchorage System Rated to not less than 1.6 kN Tested to a mean average of 2.0 kN
Pegs 16 mm diameter rod 18 mm diameter rod

As you can see from the comparison chart, all our material inputs exceed what is required in the Australian Standard, this gives you the peace of mind knowing that East Inflatables is intrinsically safe and will easily pass registration requirements set down in Australia and territories that require this.
You can use the above chart to compare our inflatables to others on offer in the market.

East Inflatables only make inflatables comply with Australia Standard, we pay attention to all the necessary parts:
2. Product Details

The standards require operators to consider the following:
A. the number of anchorage points used and the forces they are able to sustain

In East Inflatables, each bouncer each corner will come with 2 anchorage points, this will ensure the inflatable is secured to the ground with ground stakes. Each Anchorage Point on the inflatable will withstand a minimum horizontal force of 2.0KN.
2

B.Material must meet flammability requirements

In East Inflatables, material we use is from Plato chemical best supplier here in China, material is water proof and fire resistant.
3

C.Full Rain Cover
The majority of our Jumping Castles in East Inflatables have a built in rain cover, it can prevent the drizzle and hot sun. At night the built in rain covers protect the castle and the users from dew. This ensures a dry and safe jumping surface for your guests.
4

D. Netted Walled Castles
Jumping Castles, Inflatable Games come in many different designs, shapes and Sizes, the netted walls in the front of our castles, prevent children or riders from falling out of the front of the castle. The supervisors can see their children from the front and side of the jumping castle and also allows fresh air to circulate through the castle, which is important on warm to hot days.
Since December 2005, all products from East Inflatables have been manufactured with 8mm netting, which are tested in accordance with the Australian Standard. This ensures that even the smallest fingers cannot get trapped or caught in the netting.
5 6

E .Blower Covers
The blower cover is another added safety feature of our jumping castles and provides safety functions. The blower cover stops rain or water falling directly onto the blower and electrical supply.
Adding the blower cover will give parents peace of mind. Curious children and wandering hands are deterred from interfering with the blower and electrical supply.
8

F. Inflatable Steps
All of Jumping Castles from East Inflatables feature an inflatable safety step to facilitate entry and exit to the unit.
9

G. Safety Mats
In East Inflatables, you can order Safety Mats, it is installed with a soft crash mat in the front entrance of every castle, just to make sure any accidental falls or spills getting in or out of the jumping castle are met with a softer landing.
10

H. Pegs
Pegs used to hold down jumping castles should be no less than 300mm in length and a minimum thickness of 16mm and East Inflatables uses pegs of at least this standard.
11

I. Safety Nets on Slide
This is a safety net placed over the platform of the slide to encourage children and riders to sit down before entering the slide.
12

Pls be assured that all of our commercial inflatables are manufactured to comply with Australian Standard AS 3533.4.1. Don’t take a risk with children’s safety, pls make sure the supplier that you work with do right bouncer comply with Australia Standard, it’s the law in Australia.

Written by Ada from East Inflatables.

Leave a Reply

Your email address will not be published. Required fields are marked *